Support for paths allows to narrow down specific static extended
filters to specific webpages on a given site.
Examples of usage:
example.com/toto##h1
/example\.com\/toto\d+/#@#h1
Related issue:
https://github.com/uBlockOrigin/uBlock-issues/issues/3452
Use blob-based injection only when direct injection fails because
of a page's CSP. This is a mitigation until a better approach is
devised.
Such future better approach to investigate:
- Use `MAIN` world injection supported by contentScript.register()
since Firefox 128
- Investigate registering script to inject ahead of time thru
some heuristic
Related issue:
https://github.com/uBlockOrigin/uBlock-issues/issues/3394
When the "No large media elements" per-site switch is toggled on,
it will also act to prevent autoplay of video/audio media, regardless
of their size. This also works for xhr-based media streaming.
If blocking by size is not desirable while blocking autoplay is
desired, one can toggle on "No large media elements" switch while
setting "Block media elements larger than ..." to a very high value.
This commit makes the DNS resolution code better suited for both
filtering on cname and ip address. The change allows early availability
of ip address so that `ipaddress=` option can be matched at
onBeforeRequest time.
As a result, it is now possible to block root document using
`ipaddress=` option -- so long as an ip address can be extracted
before first onBeforeRequest() call.
Related issue:
https://github.com/uBlockOrigin/uBlock-issues/issues/2792
Caveat
------
the ip address used is the first one among the list of ip
addresses returned by dns.resolve() method. There is no way for uBO
to know which exact ip address will be used by the browser when
sending the request, so this is at most a best guess. The exact IP
address used by the browser is available at onHeadersReceived time,
and uBO will also filter according to this value, but by then the
network request has already been sent to the remote server.
Possibly a future improvement would make available the whole list
of ip addresses to the filtering engine, but even then it's impossible
to know with certainty which ip address will ultimately be used by the
browser -- it is entirely possible that the ip address used by the
browser might not be in the list received through dns.resolve().
As per discussion with uBO volunteers.
Volunteers offering support for uBO will be able to craft links with
specially formed URLs, which once clicked will cause uBO to automatically
force an update of specified filter lists.
The URL must be crafted as shown in the example below:
https://ublockorigin.github.io/uAssets/update-lists.html?listkeys=ublock-filters,easylist
Where the `listkeys` parameter is a comma-separated list of tokens
corresponding to filter lists. If a token does not match an enabled
filter list, it will be ignored.
The ability to update filter lists through a specially crafted link
is available only on uBO's own support sites:
- https://github.com/uBlockOrigin/
- https://reddit.com/r/uBlockOrigin/
- https://ublockorigin.github.io/
Additionally, a visual cue has been added in the "Filter lists" pane
to easily spot the filter lists which have been recently updated, where
"recently" is currently defined as less than an hour ago.
Also added additional safeguard against sticky unprocessed-request
status: all unprocessed-request statuses will be cleared after a
minute elapsed following intialization. The idea is that if the
user hasn't care to force a reload of the page, then it's assumed
to be by choice and uBO should stop informing about the status.
This commit is a rewrite of the static filtering parser into a
tree-based data structure, for easier maintenance and better
abstraction of parsed filters.
This simplifies greatly syntax coloring of filters and also
simplify extending filter syntax.
The minimum version of Chromium-based browsers has been raised
to version 73 because of usage of String.matchAll().
Related discussion:
- a0a9497b4a (commitcomment-62560291)
The new setting, when disabled (enabled by default), allows a user
to prevent uBO from waiting for all filter lists to be loaded
before allowing network activity at launch. The setting is enabled
by default, meaning uBO waits for all filter lists to be loaded in
memory before unsuspending network activity. Some users may find
this behavior undesirable, hence the new setting.
This gives the option to potentially speed up page load at launch,
at the cost of potentially not properly filtering network requests
as per filter lists/rules.
For platforms not supporting the suspension of network activity,
the setting will merely prevent whatever mechanism exists on the
platform to mitigate improper filtering of network requests at
launch. For example, in Chromium-based browsers, unchecking the
new setting will prevent the browser from re-loading tabs for
which there was network activity while in "suspended" state at
launch.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1664
The changes are enough to fulfill the related issue.
A new platform has been added in order to allow for building
a NodeJS package. From the root of the project:
./tools/make-nodejs
This will create new uBlock0.nodejs directory in the
./dist/build directory, which is a valid NodeJS package.
From the root of the package, you can try:
node test
This will instantiate a static network filtering engine,
populated by easylist and easyprivacy, which can be used
to match network requests by filling the appropriate
filtering context object.
The test.js file contains code which is typical example
of usage of the package.
Limitations: the NodeJS package can't execute the WASM
versions of the code since the WASM module requires the
use of fetch(), which is not available in NodeJS.
This is a first pass at modularizing the codebase, and
while at it a number of opportunistic small rewrites
have also been made.
This commit requires the minimum supported version for
Chromium and Firefox be raised to 61 and 60 respectively.
Though Firefox shares a lot of WebExtensions code with Chromium,
these platforms have their own specific code paths, for various
reasons.
The reorganization here makes it clear that Chromium platform is
just one flavor of WebExtensions, and as such all Chromium-specific
code paths should no longer be automatically pulled by other
platforms where these code paths are not needed.
Given that the filepath of many files changed, here is the
parent commit to quickly browse back to the previous directory
layout:
ec7db30b2f
There were spurious error messages in the dev console of
uBO in Firefox, because Firefox does not silently ignore
duplicate contextual menu entries, which could occur
transiently when the contextual menu entries were updated.
The fix simplifies contextual menu code, and actually
fulfill the original goal of avoiding to call extensions
framework API as much as possible.
The managed `userSettings` entry is an array of entries,
where each entry is a name/value pair encoded into an array
of strings.
The first item in the entry array is the name of a setting,
and the second item is the stringified value for the
setting.
This is a more convenient way for administrators to set
specific user settings. The settings set through
`userSettings` policy will always be set at uBO launch
time.
The new entry is an array of strings, each representing a
distinct line, and all entries are used to populate the
"My filters" pane.
This offers an more straightforward way for administrators
to specify a list of custom filters to use for all
installations.
The entry `toOverwrite.filterLists` is an array of
string, where each string is a token identifying a
stock filter list, or a URL for an external filter
list.
This new entry is to make it easier for an
administrator to centrally configure uBO with a
custom set of filter lists.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1433
The new "extraTrustedSiteDirectives" policy is an array
of strings, each of which is parsed as a trusted-site
directive to append to a user's own set of trusted-site
directives at launch time.
The added trusted-site directives will be considered as
part of the default set of directives by uBO.
Related issue:
- https://github.com/gorhill/uBlock/issues/1744
A new context menu entry, "Block element in frame...", will
be present when right-clicking on a frame element. When
this entry is clicked, uBO's element picker will be
launched from within the embedded frame and function the
same way as when launched from within the page.
